+
  • MB-15A.jpg

MB-15A

产品型号:

MB-084


产品特点

Contact Us

Products Details


FULL COMPUTER CONTROL

Real-time monitoring of operating parameters of the unit can realize automatic start and stop, maintenance plan, and other functions.

 

LOW CENTER OF GRAVITY DESIGN

Low center of gravity design is adopted for screw host and motor to reduce noise source and vibration,Dynamic source, improve the stability of the unit.

 

FREQUENCY CONVERSION DESIGN

Inverter integration with the space inside, save space.Frequency conversion speed regulation, soft start. Dynamic, energy saving up to 40%, reduce the cost of electricity use.
 

DIRECT CONNECTED DRIVE SYSTEM

Avoid the belt drive system because of its belt wear and slip,Efficiency reduction and energy consumption increase,ensure efficient energy transmission and constant Constant volume exports exports.
 

INSTALL ATION DIAGRAM
 

 

TECHNICAL PARAMETERS OF SCREW AIR COMPRESSOR

 

Model MBAM
10A
MBAM
15A
MBAM
20A
MBAM
30A
MBAM
40A
MBAM
50A
MBAM
60A
MBAM
75A
MBAM
100A
MBAM
150A
MBAM
175A
Motor Power kW 7.5 11 15 22 30 37 45 55 75 110 132
1.12/0.7 1.72/0.7 2.28/0.7 3.60/0.7 5.17/0.7 6.85/0.7 8.20/0.7 10.67/0.7 13.71/0.7 22.22/0.7 24.72/0.7

Displacement/

Exhaust pressure

(m3/min)

MPa

1.05/0.8 1.61/0.8 2.13/0.8 3.36/0.8 4.83/0.8 6.41/0.8 7.67/0.8 9.98/0.8 12.81/0.8 18.90/0.8 23.10/0.8
0.92/1.0 1.41/1.0 1.87/1.0 2.95/1.0 4.24/1.0 5.62/1.0 6.72/1.0 8.75/1.0 11.24/1.0 16.58/1.0 20.26/1.0
0.84/1.25 1.29/1.25 1.71/1.25 2.69/1.25 3.86/1.25 5.12/1.25 6.13/1.25 7.98/1.25 10.25/1.25 15.12/1.25 18.48/1.25
Cooling method 风冷 风冷 风冷 风冷 风冷 风冷 风冷 风冷 风冷 风冷 风冷
Drive mode 直联 直联 直联 直联 直联 直联 直联 直联 直联 直联 直联
Length x width

x height

(mm)

L 900 1050 1100 1250 1300 1390 1150 1570 1570 2200 2200
M 600 730 730 830 860 980 950 1200 1200 1550 1550
H 850 1000 1000 1220 1240 1295 1360 1500 1500 2000 2000
Net kg 18 280 310 400 580 630 660 1350 1450 2200 2250
Noise dB(A) 62±2 63±2 63±2 65±2 65±2 65±2 68±2 72±2 72±2 75±2 75±2
Outlet pipe diameter G3/4" G1" G1" G1" G1/2" G1/2" G1/2" G2" G2" G1/2" G1/2"